Description Features: Excellent opacity using the most light fast pigments for exterior use Suitable on a variety of substrates such as brick, cement render, masonry, plasterboard, metal and timber Can be used on all interior and exterior surfaces in the home and on display and feature sign work where a matt finish is required Application: Thoroughly stir and apply with brush, roller or spray Requires two coats for a perfect finish Surface Preparation: Ensure the surface is dry and clean of dirt, grease and dust. Timber No primer is necessary unless the timber is tannin rich in which case apply Acrylic Wood Primer Sand and dust down all bare timber and fill holes prior to painting Galvanised Iron and Aluminium Remove oil and grease with mineral turpentine Apply acrylic metal primer Iron and Steel Remove oil, grease and rust Treat remaining rust with a rust converter then apply acrylic metal primer Brick and Masonry Remove all loose and powdery material with a stiff brush and wash down No primer required Previously Painted Scrape off all loose and flaking paint and sand glossy surfaces Wash down with sugar soap Spot prime metal with appropriate primer When using deep tone colours such as Process Yellow and VIP Red apply a white or light grey undercoat first. This will ensure true colour and help coverage Drying: Under normal drying conditions (above 15° C and low humidity) it will touch dry in 30 minutes and can be re coated after 2 hours Do not apply if the temperature is below 10°C Clean Up and Thinning: Use clean water only Coverage 14-16 square metres per litre per coat ** Please note colours are representations only ** ** If you’re colour isn’t on the colour chart give us a call to get it made up – we can mix paint to match PMS colours **
