Description Features: A two pack waterbased clear coat that can be applied to painted and unpainted surfaces to allow easy removal of graffiti. The clear coat forms a very hard, glossy, UV protectant finish that allows solvent removal of the graffiti. Most graffiti can be removed, although there are some felt tip pens that will stain the surface and may leave ghosting on the surface Full graffiti proof properties within 12 hours of application Application: Can be applied with a brush, pad applicator or spray. Do not use a roller as this may cause foaming. The product is ready for use but if thinning is required use water. Apply two coats at a spread rate of 12 – 14 square metres per litre. Surface Preparation: On previously painted surfaces thoroughly clean the surface to remove dirt, grease and oil. Lightly sand glossy surfaces. If repainting or painting a new surface apply the required colour using Vipond’s Acrylic Low Sheen and allow at least 12 hours to dry. On new brickwork or concrete seal with Vipond’s Concrete and Masonary Sealer. Mixing: To one litre of Graffiti Coat add 12.5 mls of crosslinker. Add the crosslinker while gently stirring the Graffiti Coat. Leave for 15 minutes then gently stir again before using. Only stir gently to minimize aeration of the paint. The crosslinked Graffiti Coat will lose its reactivity after 16 hours but can be reactivated with the addition of more crosslinker Drying Time: Under normal drying conditions (above 14°C and low humidity) it will be touch dry within 30 minutes and can be recoated after 2 hours. Do not apply if the temperature is below 10°C. Coverage: 14 square metres per litre per coat Cleaning and Thinning: Use clean water only Removing Graffiti: Use Viponds Graffiti Cleaner to remove graffiti. After removing graffiti several times the clear coat may be damaged and it is recommended to apply another coat of Graffiti Coat. On rough textured surfaces cleaning off graffiti may be difficult
